UsingTula Pink Webbing to make Straps and Handles - ByAnnie

August 10, 2022

Fabulous video byAnnie on How to use the webbing to make your straps and handles

access video link

start at 20:00 and later at 32.00

How to use naked webbing to make straps for bags   

Example on the Zip it up Pattern 

We opted to make the handle using Tula Pink webbing  which makes super fast work of a normally tedious process.

We used the 1" webbing

Webbing handles

Webbing handles  Zip it up by Annie

Example on the Catch All Caddy Pattern 

ByAnnie “Catch All Caddy” Webbing Kit Addendum
By Kim Greenfeld

 

We opted to make our handles using Tula Pink webbing which makes super fast work of a normally tedious process.

   When working with nylon webbing, I like to slightly singe each cut end with a lighter to eliminate fraying;  you can also use a product like Fray Check.

Webbing Cutting Instructions:

• For the handle tabs, cut four 12” strips
• For the handles, cut two 19” strips

 

To Make Handle Tabs:

Insert 1 ½” of webbing into rectangle ring, fold over the webbing and sew to secure.  I like to make a ¾” box with an X inside.  I stitch this twice for extra security.  Make 4. 

The other end of the webbing piece gets inserted in the bottom seam - see illustration below

 

To Make Handles:

Mark a line 4 ½” from each side.  Fold the webbing in half lengthwise and stitch between these marked lines.  I stitched at 1/8” intervals to secure—your thread will show, so pay attention to both your top and bottom thread.

 

To Complete Handle Units:

Follow the instructions in Section IIC of the pattern.

 

Webbing handles

How to make handles using Tula Pink webbing  How to make  handles using Tula Pink webbing


Subscribe